Home > Hard Drive Data Recovery >

FX2070 3-port SATA/SAS Duplicator, Eraser, Tester, Forensic
FX2070, Hard Drive Duplicator, demi yg1040, demiyg1040, y-2070
- SCSI, Fibre Channel, USB3.0, ATA Optional
- Evidence preservation (forensics)
- SATA 6Gbps compatible
- Ultra high-speed duplicator supporting multi-interfaces

Request a Quote
Reg. US: $4,990.00
Sale Price: $4,399.00
You save $591.00!

Product Code: FX2070


FX2070 Hard Drive Duplicator- SATA, SAS, ATA, SCSI, SAS, FC, USB

The FX2070 Hard drive duplicator preforms the following functions:
  • High speed data transfer (Approx. 1.6 seconds per 1GB)
  • Hash value creation, DD image creation and E01 creation functions
  • Function to save execution logs to USB memory
  • RAID master two-device simultaneous copy function
  • SATA, ATA, SCSI, SAS, FC, USB Multi-interfaces supported
  • USB 3.0 master function
  • Supports SATA 6Gbps. ATA storage is supported by using optional products sold separately.
    • Supports ATA, SCSI, SAS, FC, USB storage by using optional products sold separately,
    • Can connect to various interfaces with single unit.
  • Ultra high-speed data transfer at 37GB per minute.
    • (Varies according to the performance of connected devices.)
  • Execution logs can be immediately saved to USB memory connected to the main unit.
    • Deletion reports can be created based on saved logs.
    • (Host program sold separately is required to create deletion reports.)
  • Rugged built-in evidence preservation functions including hash value generation (MD5, SHA1, and SHA256), DD image creation and E01 creation.
  • Deletion function conforms to various standards
    • Supports NSA (National Security Agency) recommended, DoD (Department of Defense) conforming, U.S. military and NCSC systems.
    • Enables deletion operation report creation by using terminal software (sold separately).
  • Enables high-speed copy from master storage connected via USB. (USB 3.0)
  • Enables simultaneous copying of 2 RAID master HDDs.
  • Supported Interfaces: SATAIII, ATA, SCSI, SAS, FC, USB3.0
  • Number of HDDs to be connected: 1:1 or 1:2 for copy, 3 for deletion and diagnostics

FX2070 Hard Drive Duplicator Specifications

Dimensions (WxHxD): 350 x 255 x 70 (mm)
Weight: 2.7kg (Main unit only)
Input Power: AC 100V ~ 240V 50/60Hz
Consumption Current: 1.92A (Max.)
Temperature, Humidity: 10C ~ 35C, 30 to 80% (No condensation)
Number of HDD's to be Connected: Copy:
2 (1:1, 2:2)
Deletion: 3
Diagnostics: 3
Logging Interface: USB 3.0
Host Interface: LAN (1000BASE-T, 100VASE-TX, 10BASE-T)
Included Accessories:
  • AC Power Cable (AC2P to 3P connector included) x 1
  • AC adapter x 1
  • SATA Interface Cable x 4
  • Manual CD x 1
Transfer Speed: 37GB/min
Optional Products:
  • Utility software (Disklosure)
  • Interface boards
  • Host program
  • Carrying case

FX2070 Functions

Copy Function:
  • Entire area copy function
  • Used area copy function
  • Clip copy function
  • Each copy and bit compare function
  • Bit compare function;
  • Backup function (Bad sector skip copy function)
Deletion Function:
  • Random data, count specified deletion NSA recommended method DoD conforming method (DoD55220.22-M)
  • Deletion report creation function and log data collection function (Terminal software required)
Quick Diagnostic Function:
  • Seek test Verify test
  • Read test
  • Write test
  • Read compare test (Common to all products.)
  • SMART status check (Only for DemiUAv3 and DemiXG Series)
  • SMART self-test (Only for DemiUAv3)
Clip Function:
  • Random capacity clip function
  • AUTO clip function (Clip the target according to master capacity.)
  • Clip off function
Cross Copy: Copy and compare between:
  • ATA to SATA
  • ATA to SCSI
  • SATA to SCSI