The M6210 production USB duplicator is normally used in a Stand Alone Mode. The front panel keys allow the user to select from a number of standard functions displayed on the LCD display. In a typical duplication job, the USB master drive is loaded into the M6210 Master Slot and ten copy USB drives are loaded into the ten M6210 USB drive copy slots. The Start Key on the front of the M6210 is then depressed, and all 10 copy drives are now programmed with the exact information on the Master Drive.

When the user desires more than 10 copy slots ( i.e. 20, 30, or 40 copy slots ), multiple M6210’s can be stacked on top of each other and held together using optional side brackets.

• Low, Medium and High Volume Duplication
• Supports 1.1 and 2.0 USB Flash Drives
• Typical Program Speeds >300 MB/Min for Fully Loaded Machines
• Optional Mechanical Panels for 20, 30 or 40 Socket Configurations
• Win PC Program for Setup and Control Using Standard USB 2.0 Port
• Automatic Sizing and Size Checking of the Master and Copy Cards