High Speed Production Duplication of Memory Flash Cards

The M6550MC is made up of one to four sections of eight sockets each. Each section has its own powerful Pentium IV computer running Linux. The sections are networked together using a high speed multi-port Ethernet switch so that all sections may share a common control window. Once a duplication job is launched in the user friendly GUI window, each section is individually started using the sections' START Key.

Because each section is a separate computer with parallel processing of the copy and verify data to all up to sixty-four copy sockets, while any section is being unloaded and then loaded, the other three sections can be performing a copy function. This sequential operation of each section allows maximum throughput for the system.

Included Front Panel Functions for Each Section

• Copy master to copy cards
  
• Set up user job
  
• Set up card type
• Verify master against copy cards
  
• Copy log to USB drive
  
• Set up card parameters

• Eight/Sixteen Duplication Slots and One Master Card Slot.
  
• Support up to SD V2.00 and MMC V4.00
  
• Fast Duplication performed in parallel on all eight/sixteen-copy slots.
  
• Binary Image Copy allows the copy process to be independent of the operating system or file system.
  
• The "Auto" function performs automatic sizing and size checking of the master and copy cards.
  
• Software Options for copying a smaller image
  
• Simple Stand Alone Operation using the M6550 LCD and Front Panel Keys
  
• Optional Windows compatible software available for control of the M6550 using an RS232C port.