| The V91HD/DLT bulk eraser is a high energy, bulk eraser especially to tackle the erasing of hard disk drives and of DLT tapes. Hard Disk Drives The vulnerability of information stored on PC hard drives is a recognized security risk. Unlike other PC data storage media the hard drive always stays with the PC. Every time a PC leaves a company's control all the data and company information will go with it. Even if the hard drive breaks down the storage platters will still contain information which could be read once repaired. In keeping with our policy of recognizing user requirements we have introduced the V91 HD/DLT. The unit is capable of removing data from PC hard drives in less than 20 seconds. Although in most cases this will render the hard drive inoperative, the cost of a replacement hard drive cannot be compared to the cost to a company if sensitive information can be read by a third party. Even if only used infrequently the V91 provides a cost security solution to the protection of company, client and sensitive computer data. DLT To re-use your previously formatted DLTtape IV tapes in the DLT1 tape drive, Verity Systems has introduced the V91 HD/DLT. Anyone upgrading their existing DLT drive with the new DLT1 drive should understand that their existing inventory of recorded DLTtape IV media may not be usable in the DLT1 without thoroughly degaussing them before hand. Media recorded in either the DLT7000 or DLT8000 format will be automatically rejected to protect the data on the tape. The problem is easily solved by erasing all existing DLT tapes on Verity Systems V91 bulk eraser. The V91 will erase all old data and formats in 10 seconds leaving the tapes completely clear and ready to use in DLT1 drives. Media: - 3 1/2" and 5 1/4" PC Hard Drives and Super DLT I, II and III, DLT IV - VSL;
- 1/2" Computer tape, diskettes - single/boxed, DC 600, 2000
- TK50, 70, 85, 3480/3490E/3590/3590E
- 4mm
- 8mm
- Exbyte
- Travan
- DLT
- DAT
- Zip Disk
- ultrium LTO LTO2 & LTO3
- S-DLT
Specifications: Power Supply: 220/240 volts 50Hz, 110/115 volts 60Hz Current Rating: 9 amps typ. Erasure Depth: -75dB on 1500 Oe; -90 dB on 750 Oe Degaussing force: 5100 peak Duty Cycle: Non-continuous, as little as 20 seconds per cassette Throughput: 20 hard drives per hour typ. or 90 DLT tapes
Dimensions: Height: 154mm (6") Depth: 340mm (13.5") Width: 270mm (10.5") Weight: 35kg (77lbs) Controls: Main switch; security key switch;
Indicators: Coil power supply warning light; On/Off erase field
|