iOpen Pro Series SATA-2 HDD Duplicator
These hard drive duplicators are open platform and designed for duplicating SSD easily, supporting various SSD interfaces, CF & CFast Cards.
- Asynchronous copy to achieve higher efficiency
- High copy speed up to 300 MB/s
- Support 2.5" & 3.5" HDD without adapter
- Intelligent Copy achieve most efficient performance
- 3 data erase modes: Quick, Full, DoD
High Copy Speed of 18GB/min
High copy speed up to 300 MB/s or 18GB per minute. The copy speed will remain the same even if the number of load is increased. In today's competitive business environment, higher efficiency allows you to stand out from the others
Open Platform Design
Creative Open Platform design for the convenience of SSD duplication. Inserting the SSD converter (SSD to HDD interface) into the copy port, and exchanging SSD without unplugging the converter to save time and achieve higher efficiency.
Supporting Multi-Format SSD Interfaces and CF & CFast Card
Open Platform series HDD Duplicator support mSATA, Micro SATA and NFF format of SSD interface, CF and CFast Card are also supported. *The converters are optional
Compatible of HDDs with Different Sizes
Fits both 2.5" and 3.5" HDD without the use of an adaptor. It is convenient for you to use HDD with Different size and increase operation efficiency.
Intelligent Copy Only Copy Valid Data Area
Analyze valid data area promptly by unique source analysis technology, only copy system and data file. Supported file systems under three major operating systems: Windows, Linux and macOS. No need to copy the whole media and allowing you to do more in less time!
Supports MBR & GPT
Supports MBR and GPT partitioning schemes and copy device capacity more than 2TB (unlimited) as well as single file larger than 4GB. Advanced format (4K) HDD is also supported.
Asynchronous Copy increase Working Efficiency Signifigantly
Copy process starts immediately when a new target is inserted, does not have to wait for all target devices get ready. It saves a lot of time during inserting the target device, the more targets the more time is saved. Exclusive technology enables asynchronous operation without the restrictions of memory size
With an optional large signal lamp, machine operating status is at a glance. Even if you are not next to it, you still can know the duplicator working status at any time.
Powerful Quality Check
6 Testing Criteria Test range/ Bad sector ratio/ Read speed threshold/ Write speed threshold/ Capacity threshold/ Format type.
- H3 Read Test
- H4 Write/Read Test
- H6 Cyclic Unused Area Write/Read Test
- H7 Fake Card Test
4 Testing Results Bad sector quantity/ Tested capacity/ Average read speed/ Average write speed.