Ultimate-4 Complete NSA-Compliant HDD/SSD Media Destruction Bundle
Complete NSA-Compliant Destruction with Integrated Audit Trail for Magnetic and Solid-State Media
The Ultimate-4 bundle delivers a comprehensive NSA/CSS-compliant data destruction solution that addresses the fundamental challenge of modern data security: magnetic and solid-state media require completely different destruction methods. This integrated system combines the TS-1XT IRONCLAD degausser from the NSA/CSS Evaluated Products List, the PT828HDD shredder certified to H-4/P-3 security levels, and the Kobra SSD disintegrator with Log Management System approved by the National Security Agency providing complete audit trail documentation for both media types.
Why No Single Machine Can Destroy All Media Types
Magnetic Hard Drives store data by aligning magnetic particles on spinning platters. Even after physical shredding, these patterns can be reconstructed if fragments retain magnetic properties. The NSA requires both degaussing (magnetic erasure) and physical destruction.
Solid-State Drives store data using electrical charges in flash memory cells. Magnetic fields have zero effect on SSDs. The NSA requires physical disintegration to particles smaller than 2mm to prevent any data recovery from memory chips.
This fundamental difference in storage technology makes the Ultimate-4's multi-system approach essential for complete data security.
Bundle Components
TS-1XT IRONCLAD Degausser
NSA/CSS Evaluated Products List Certified Magnetic Erasure
- 20,000 Gauss (2 Tesla) magnetic field completely destroys all magnetic media in 15 seconds
- Integrated IRONCLAD verification system captures photo evidence and field strength confirmation for every drive
- 120 drives/hour verified throughput with complete audit trail documentation
- Processes all magnetic media formats: 1.8", 2.5", 3.5" HDDs, LTO/DLT/AIT tapes
- Immediate pass/fail indication with green/red status lights and numerical field strength display
PT828HDD Shredder
H-4/P-3 Security Level Physical Destruction
- 4.5 HP continuous duty motor delivers 180-200 drives/hour shredding capacity
- 38mm x 38-90mm particle size meets NSA requirements for classified magnetic media
- Multi-media capability processes HDDs, optical media (CDs/DVDs/Blu-rays), and 80-100 sheets of paper
- 31-gallon waste capacity enables high-volume continuous operation without frequent emptying
- Auto jam protection with reverse function ensures uninterrupted operation
Kobra SSD Disintegrator with IRONCLAD
NSA-Approved Solid-State Destruction with Photographic Verification
- Sub-2mm particle size achieved through two-stage destruction with 7.5" diameter 16-blade grinders
- IRONCLAD verification captures pre-destruction photos with visible serial numbers
- 90 lbs/hour throughput for all solid-state media: SSDs, flash drives, phones, tablets
- HEPA filtration system captures harmful materials from integrated circuits
- Electronic monitoring continuously adjusts both stages for reliable operation
Unified IRONCLAD Verification Systems
Photographic Documentation for All Media
- Magnetic Media: Photos before/after degaussing with field strength verification
- Solid-State Media: Photos with serial numbers before disintegration
- Both systems include operator ID and witness verification capabilities
- Automatic timestamp documentation for complete chain of custody
- Password-protected database with tamper-evident security
Consistent Certificate Generation
- PDF, CSV, and Excel formats available for all destroyed media
- Single reporting standard simplifies compliance documentation
- Court-admissible certificates with photographic evidence
- 16GB internal storage for extensive audit records
Technical Specifications
Magnetic Media Destruction Line
| Specification | TS-1XT IRONCLAD | PT828HDD |
|---|---|---|
| Destruction Method: | 20,000 Gauss (2 Tesla) magnetic field | Physical shredding |
| Cycle Time: | 15 seconds per drive | Continuous operation |
| Particle Size: | N/A (magnetic erasure) | 38mm x 38-90mm |
| Media Accepted: | 1.8", 2.5", 3.5" HDDs, magnetic tapes | 2.5", 3.5" HDDs, optical media, paper |
| Throughput: | Up to 120 drives/hour with verification | 180-200 drives/hour |
| Actual Workflow: | 120 drives/hour maximum (limited by degausser) | |
| Power: | Standard outlet | 220V 3-phase, 20A |
| Dimensions: | 19.3" x 9.8" x 29.1" | 38.25" x 33.5" x 46.5" |
| Weight: | 107 lbs | 1,257 lbs |
Solid-State Media Destruction Line
| Specification | Kobra SSD with IRONCLAD |
|---|---|
| Particle Size: | <2mm (sand-like texture) |
| Media Accepted: | SSDs, M.2, NVMe, flash drives, phones, tablets, circuit boards |
| Throughput: | Up to 90 lbs/hour with verification |
| Power: | 208V 3-phase, 50A per phase |
| Dimensions: | 41" x 32" x 48" |
| Weight: | 1,250 lbs |
Compliance Standards Met
- NSA/CSS Evaluated Products List (TS-1XT Listed)
- NSA/CSS Approved SSD Specifications (Kobra)
- NIST SP 800-88r1 Guidelines
- ISO/IEC 21964 (DIN 66399) H-4/P-3/E-7/T-7
- DoD 5220.22-M Standards
- TAA Compliant for Federal Procurement
- HIPAA, GDPR, PCI DSS, GLBA
Critical Pre-Installation Requirements
Electrical Infrastructure
Professional electrical installation required before equipment delivery:
| Equipment | Requirement | Installation Type |
|---|---|---|
| TS-1XT IRONCLAD: | Standard outlet | Plug included |
| PT828HDD: | 220V 3-phase, 60Hz, 20A | NEMA L15-20R receptacle |
| Kobra SSD: | 208V 3-phase, 50A per phase | Hardwired or industrial plug |
Operational Workflows
Magnetic Media (HDD) Workflow
- IRONCLAD scans barcode and captures serial number
- Photograph drive showing serial number
- Degauss with 20,000 Gauss field (15 seconds)
- IRONCLAD verifies magnetic field strength
- Transfer to PT828HDD for physical shredding
- Shred to 38mm particles
- Generate destruction certificate with photo proof Throughput: 120 drives/hour with complete verification
Solid State Media (SSD) Workflow
- IRONCLAD scans barcode and captures serial number
- Photograph device showing serial number
- Remove batteries and prohibited components
- Feed into Kobra SSD disintegrator
- Two-stage destruction to sub-2mm particles
- Generate destruction certificate with photo proof Throughput: 90 lbs/hour with complete verification
Package Contents
View Complete Package Contents
TS-1XT IRONCLAD Package:
- TS-1XT degausser unit
- IRONCLAD Erasure Verification System
- 7" touchscreen control head
- SCAN-1X barcode scanner and stand
- Report generating software
- 50 "Degaussed" labels
- Power cable with standard plug
- One year software support
- Operating manual
PT828HDD Package:
- PT828HDD shredder unit
- Digital User Guide
- NEMA L15-20P plug
Kobra SSD Package:
- Kobra SSD disintegrator unit
- Kobra Log Management System with USB barcode scanner
- 5 plastic disposal bags
- 5 air filters
- 1 HEPA filter
- 1 set of keys
- Operations/Maintenance manual
Total Cost of Ownership
Included at No Additional Cost:
- Dual IRONCLAD verification systems
- Unified reporting and certificate generation
- Log Management System for complete audit trail
- Initial operating supplies (bags, filters)
- Professional training and setup support
Ongoing Operational Costs:
- HEPA filter replacement (annually)
- Air filters (as needed based on volume)
- Disposal bags
- Blade replacement (varies by usage)
- Media preprocessing labor
Ultimate - 4 Frequently Asked Questions
What advantage does dual IRONCLAD verification provide?
Both magnetic and solid-state media receive photographic proof of destruction with formal certificates. This unified approach eliminates audit gaps and provides legally defensible documentation for all media types.
How does IRONCLAD work differently for HDDs versus SSDs?
For HDDs, IRONCLAD captures before/after photos and verifies the degaussing field strength. For SSDs, it photographs devices with serial numbers before they're disintegrated to sand-like particles. Both generate formal destruction certificates.
Why can't one machine destroy everything?
Magnetic media requires degaussing to erase magnetic patterns, which has no effect on SSDs. Solid-state media requires physical disintegration to sub-2mm particles. The NSA mandates these specific methods based on how each technology stores data.
What preparation do SSDs require?
Batteries, capacitors, relays, heat-sinks, and LCD displays must be removed to prevent fires, explosions, or toxic fumes during disintegration.
Can HDDs go through the Kobra SSD?
No. HDDs will damage the Kobra SSD and void the warranty. Hard drives must use the magnetic media workflow only.
What's the actual processing capacity?
Magnetic media: 120 drives/hour complete with IRONCLAD verification. Solid-state: 90 lbs/hour with IRONCLAD verification. Both workflows can operate simultaneously.
Do both IRONCLAD systems work the same way?
Both use the same interface and generate identical certificate formats, simplifying training. The verification process is tailored to each media type's destruction method.
| Part Numbers: | TS-1XT IRONCLAD |
|---|---|
| IRONCLAD Includes: |
|
| Option: | Optial media burner |
| Power Supply: |
TS-1XT: 110~125VAC ±5%, 50/60 Hz. IRONCLAD: 90~240VAC, 47-440 Hz |
| Power Consumption: |
TS-1XT: During standby: 108; During charging: 1272W average; During Erase:
120W IRONCLAD: 15W |
| Degausser System: | Capacitive Discharge |
| Duty Cycle: | Continuous |
|
Throughput (hard drives per hour): |
Up to 1300 (1.8 in.) Up to 875 (2.5 in.) Up to 150 (3.5 in.) |
|
Throughput with IRONCLAD (hard drives per hour): |
Up to 120 |
| Magnetic Field: | 2 Tesla (20,000 Gauss) nominal |
| Erasure Verification: | IRONCLAD |
| Certifications/Listing: |
TS-1XT: NSA/CSS EPL, CE, TAA, NSA/CSS EPL, CE, TAA IRONCLAD: CE, TAA |
| Charge Time: | 15 seconds |
| Portability Features: | Four 6" wide retractable machined alloy handles on each side. |
| Media: |
Hard drives: laptop, standard or network up to 1.25" height Tape media: All LTO, all DLT, AIT, 2590 Series, 8mm, and others |
|
Media Drawer Capacity (HxWxD): |
1.3 x 4.3 x 5.9 (in.) 31.8 x 108 x 148.6 (mm) |
| Storage Capacity: | 16GB |
| Screen Size: | 7 in. |
| Weight |
TS-1XT: 107 lbs (48.5 kg) Control head: 4 lbs (1.8 kg) |
| Overall Size: |
TS-1XT IRONCLAD: 19.3 x 9.8 x 29.1 (in.) 490 x 247.7 x 740.2 (mm) Control head: 6.6 x 9.6 x 2.5 (in.) 168 x 244 x 64 (mm) |
| Warranty: |
TS-1XT: One-year manufacturer’s limited warranty
standard, optional three year limited warranty
available. TS-1XTE: One-year manufacturer’s limited warranty standard. |
| Note: | Hard Drives and some tapes are not reusable after having been erased by the TS-1XT. |
| PT828HDD Shredder Specifications | |
| Power Supply: | 220v 3 Phase |
| Dimensions: | 38.25" x 33.5" x 46.5" (L x W x H) |
| Weight: | 1,257 lbs |
| Motor: | 4.5 HP |
| Throughput: | 180 - 200 drives/hour |
| Warranty: | 1 Year |
| Optical/Paper | Hard Drive | |
|---|---|---|
| Feed Width: | 11.8" | 4.7" |
| Waste Volume: | 31 gal. | 26 gal. |
| Paper Capacity: | #20: 100 | #16: 110 |
| Shred Size: | 5 mm x 70 mm | 38mm x 38-90mm |
| Security Level: | P-3 | H-4 |
| Kobra SSD Solid State Drive High Security Disintegrator | ||
| Throat Width: | 9.5 x 1 inch | |
| Shred size: | Sand-like texture particle | |
|
Security level ISO/IEC 21964 (DIN 66399): |
Similar to O-7 T-7 E-7 Meets NSA/CSS Solid State Disintegrator (SSD) Specifications | |
| Shreddable materials: | Solid State Drives, Solid State SIM Cards, Flash Drives, Circuit Boards, Enterprise Solid State Drives, Cell Phones, Tablets, USB Pen Drives, USB memory devices, flash memory IC chips, CPU chips with internal ROM and/or flash memory, CD/DVD/Blu-ray disks* | |
| Waste bin capacity: | 9 gal | |
| Rated Capacity: | Up to 90lbs/hour* | |
| Voltage: | 208 Volt / 3 phases 50 amps per phase | |
| Power: | 7 HP | |
| Dimensions (WxDxH): | 41 x 32 x 48 inch | |
| Net weight: | 1250 lbs | |
