Home > HDD | Tape Degaussers > Automatic Hard Drive Degaussers >

Datagone Hard Drive Degausser
Tape Degausser, Erases Magnetic Media
Datagone Hard Drive Degausser
 
Alternative Views:


Automatic Hard Disk Drive and Tape Degausser

- Single Pass Fully Automatic Operation
- Over 200 drives erased per hour
- Complete Erasure of hard drives and Tapes
- Processor Controlled operation for Failsafe erasure
- Effective on Longitudinal & Perpendicular Hard Drives

DatagoneDownload Datagone Datasheet

Datagone LGDownload Datagone LG Datasheet

Request a Quote
Reg. US: $6,499.00
Sale Price: $5,995.00
You save $504.00!



Product Code: MDSZZ001204


Degausser Options:
DataGone (default)

Degausser Options 2:
DataGone LG (with Destruction Auditor) [Add $100.00]

Warranty*:

Media Erased Labels

Labels:
Roll of 1,000 Self-Adhesive Hard Drive Erased Labels [Add $99.00]
Shipping & Transport Case

Case:
DataGone Transport Case [Add $975.00]

Optional:
Barcode Scanner [Add $139.00]

Qty:
Description Technical Specs
 

DATAGONE High Energy Automatic Hard Drive & Backup Tape Degausser

The DATAGONE is a fully automatic degausser for Hard Discs and Backup tapes. It uses pulse discharge technology and is fully processor controlled which enables the DATAGONE to offer a complete and secure erase on magnetic media. Media that can be degaussed includes Hard Drives that use both perpendicular and vertical recording techniques and most common backup tapes including DLT, LTO, 8mm, DDS and more.

Performance

The DATAGONE generates a powerful magnetic field and in less than a second completely erases the complete data from Hard Drives and Backup tapes. Its simple one pass fully automatic operation makes it ideal for businesses where security is of the utmost importance.

Operation

When powered up the DATAGONE table top mounted unit simply slides the hard drive into the aperture on the left hand side of the unit. The unit senses the presence of the media DATAGONE High Energy Automatic Hard Drive & Backup Tape Degausser and the degauss cycle starts automatically. No operator action is required. When the degauss cycle is complete, the hard drive is released and exits from the degausser on the right hand side. Throughout the entire degauss cycle the onboard processor monitors the procedure and progress messages are displayed on the LCD panel. If the degauss cycle is interrupted for any reason such as power loss or any fault condition, the media is retained in the DATAGONE and the operator is immediately alerted to the interruption in the erasure cycle on the LCD panel. To eject media when the cycle has failed for any reason the operator has to press the reset button. This releases the Hard Drive or Tape and resets the degauss cycle. The operator should then attempt a repeat erasure. The entire erasure process takes approximately 8 seconds

Features

  • Single Pass Fully Automatic Operation
  • Over 250 drives erased per hour
  • Complete Erasure of hard drives and Tapes
  • Processor Controlled operation for Failsafe erasure
  • Effective on Longitudinal & Perpendicular Hard Drives
  • Free lifetime technical support
  • Optional transport case available
DataGone Hard Drive Degausser
DataGone LG Automatic Hard Drive Degausser