Home > Hard Drive Duplicators >

SuperCopier Complete IT Kit for 8" Field Unit - I7 Edition - Hard Drive Duplication Unit
SuperCopier 8" kit-Hard Drive Data Duplicator
Super Copier IT 8" Kit Field Unit
Request a Quote
Reg. US: $5,350.00

Product Code: SIK-C004-00C

Description Technical Specs

SuperCopier Complete IT Kit for 8" Field Unit I7 Edition - Hard Drive Duplication Unit

SuperCopier 8" Field Unit IT Complete Kit i7 Edition consist of:

  1. SuperCopier 8" Field unit i7 Edition (i7 CPU, 256GB mSATA, 16GB internal memory) which is extremely fast cloning and data duplication field unit (100% bit by bit speed is 31GB/min SSD, 10GB/min with 1TB WD). Built-in a color LCD display with a Touchscreen, 4 SAS/SATA-3 ports, 6 USB3.0 ports, 1Gigabit Ethernet port, e-SATA port, and HDMI port. The SuperCopier application supports very flexible operation of multiple session, and in each session user can define it source and targets. The unit is running under Linux- Ubuntu in a very efficient way. Utilizing 8 CPU cores, each core can handle a session very effectively and achieves a great transfer rate. Also the application generates detailed Log files and Certification for cloning and erase operations that can be easily exported to USB stick. The erase operation is NIST800-88 compliance.
  2. Expansion Box (1394B 2 ports and 1394A one port controller and SCSI LVDS ULTRA 320 controller pre-installed)
  3. SCSI Kit - Supports clone data from 2 SCSI Hard Disk Drives
  4. Rugged and rolling IM2500i case, customized foam, and with a lid organizer
  5. Essential Accessories

Main Hardware Features:
Case: Mobile, lightweight, easy to carry
Display: 8" (800X600) LED backlight Touchscreen color LCD display
Secure DC-in connector: Keyed and Locked DC-In connector to avoid accidental disconnect in the middle of operation
Speed: Externally fast and efficient operation with less OS overhead
GUI: The Cloning application is built with large and simple icons and it is easy to navigate
Storage Interfaces: SAS, SATA, e-SATA enclosures, IDE(with supplied adapters), USB3.0, 1394, Thunderbolt, SCSI, M.2 NGFF(SATA or PCIE base)
Storage Devices Supported Form Factors: 3.5 inch, 2.5 inch, ZIF, 1.8", Micro-SATA, Mini- SATA, and M.2 NGFF
OS: Linux Ubuntu 64 bit
48 Bit Addressing: Support drives with size up to 256TB
Quick Format Hard Disk Drives: FAT32, NTFS, exFAT, EXT4, HFS+
HPA/DCO Automatic Supports: The application open HPA and DCO areas on the drive for erase or clone
Log Files: The Application generates extensive and detailed log files that user can easily export to USB flash drive
Bad Sectors Handling: User have the choice to set a few options: Skip bad sectors, Skip bad blocks, or abort the operations
Drive Duplication Mode: Mirror Image 100% bit by bit or any % of the drive, or Quick Copy where the cloning and deploying process is done with copy of file systems only
Flexible Port's Role Assignment: User can re-assign any port a role to be source or target
Cloning default source ports: One SAS/SATA port and one USB3.0 port are set as source ports for cloning operation
Support Smart Copy From OS: NTFS, FAT, exFAT. EXT2-4
Main Application Features:
  • Erase data from hard disk drives
  • Clone: Mirror bit by bit (Any OS) or Smart Quick Copy (NTFS, FAT, exFAT, EXT2-4)
  • Quick Format of hard disk drives
Main Copy/Duplicate/Clone application Features:
  • Mirror Image: 100% bit by bit for any size of master and target with any OS. Source and targets drives need to be the same make and size if user needs to boot from the target drives
  • Quick Capture- Advanced Smart Copy mode: Where the cloning and deploying process is done with copy of file system.
  • It supports source drives with FAT/NTFS/EXT -2-3-4 file system
  • Automatic scan for all the partitions on the source drive
  • Optional to scale all partitions, or scale only selective partition by user selection and choice
  • Optional not to scale partitions
  • Flexibility in cloning mode can be 1:3, 2:2 and more modes with use of USB3.0 to SATA adapters
  • If the size of the DATA on the source drive (not the size of source drive) will fit the target drive, than the quick capture will be completed
  • Automatic format and partitions the target drives: On-the-fly during the duplication runs
Verification of the copied data:

Built-in data transfer verification mode applied for all modes of copy. For 100% bit by bit copy: The user can select to add optional HASH calculation value during the data transfer (MD5, SHa-1, SHA-2) as authentication and verification of the copied data. SHA-1 is the fastest mode and it almost adds not delay to the total copy time. For extra precaution, user can also enable the option to "HASH target drives and compare" which will run an addition read pass over the target drives at the end of the copy, calculated Hash value by reading the data from the target drives, and compare the Hash values to the one that was generated from the source drive. That extra step add some extra time, for example if running 100% bit by bit copy from 1TB source HDD to 7TB targets HDD can takes around 2h, HASH target drives and compare can add another hour to the total time

  • Native SAS: 4 Ports
  • Native SATA: 5 Ports (with use of the unit’s eSATA port)
  • USB3.0: 6 Ports
  • USB2.0: 2 Port
More Ports: With the use of USB3.0 to SATA fast adapters and with the combination of e-SATA port, the unit can support up to 11 SATA drives. With the use of Express Port Option enabled, and the Optional Sonnet 4 SAS Ports Express Card Adapter, the application can support up to 8 SAS drives Network:
Parallel Operations:
Multiple Session Operations: Versatility with Multiple Cloning Sessions: User can assign and selects one source and many targets into one session of cloning. Also user can have many sessions of cloning, each will have source and at least one target, which gives the user more possibilities to use the unit in a very efficient way. User can run a multiple efficient parallel operation on any available ports. There are some limitations on the number of simultaneous sessions: i7 CPU has 8 sessions limitation. However, user can combine more than one port/storage devices in the same sessions. Also. user can mix different type of operations, and each operation is set as a new independent session. Example of operations: Erase data with DoD protocol from a hard disk drive on one port, quick smart image on a second port and third ports, and so User can erase up to 10 storage devices in multiple independence sessions, or from one source up to 9 targets (1:9) in one session, or clone from 5 sources to 5 targets (5:5) in 3 separate sessions (With the use very fast USB3.0 to SATA adapters)
Multiple Session Application Screen: All running sessions are displayed in one Application Screen. The application screen shows the name of the session, the operation of the session, the error or abortion flag, completion progress bar, successful completion flag. User can abort a session, tap on a session to monitor its real time running progress and get detailed setting. It is a very easy way to view, navigate, and control the sessions
Hard Drive Detection Application Screen: All hard disk drives and storage devices that are connected to the units will be scanned and displayed in one application screen, called “the detection screen”. User can tap on each drive to get its detailed info, as well as selecting it for the desired operation they are planning to use
Network: Save Images to local network
S.M.A.R.T. drive tests:

If user intend to erase drive for re-use purpose, it would be recommended to to run some "Health test" on the drive prior to erase process. There are available are 3 type of tests:
  1. Short Test (2-5 minutes) which scan random area on the drive
  2. Extended Full Test (Can take hours) that scan the entire drive
  3. Conveyance Test that identify damage incurred during transporting of the drive, to evaluate the "health" condition of the drive prior to erase operation
Erase Hard Disk Drives operation: Use DoD 5220-22M, Security Erase, Enhanced Security erase, or user define pattern and numbers of iteration. The erase operation is NIST 800-88 compliance
Erase certification: The Application generates NIST 800-88 erase certification that user can easily export to USB flash drive
Quick Format Hard Disk Drives: FAT32, NTFS, exFAT, EXT4, HFS+
Expansion Box: The kit includes Expansion Box with SCSI LVDS controller and Express port card reader pre installed, and it is includes hardware and adapters to supports cloning and erase from 1394 device, SCSI hard disk drives and more
Built in USA: The units are built and tested in the US