DupliUSB Series USB 2.0/3.0/3.1 Flash Memory Eraser and Duplicator
The DupliUSB series is a standalone, highly efficient professional grade duplicating unit, specifically designed for USB flash memory card duplication. These professional USB cloning devices are standalone, requiring no computer hardware or software to operate and clones at up to 2GB per minute if the speed of your compact flash card permits.
This DupliUSB duplicator series is integrated with a high-speed compare function to ensure data copies with 100% accuracy. It also boasts quick format capabilities. These features greatly increase efficiency and production productivity. This unit is backed by a full 12 months limited warranty.
Advanced Features of PRO Model over the standard (STD) model:
- Event-log Reporting Function: Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole duplication control process. The Event Log report records all details of each duplication task. For example, working time, run function, model number, the serial number of media and results etc.
- Burn-in Test Function: To find out the durability of your Flash devices, you can select the Burn-In function. You can set how long and how many loops and duration of the Burn-In test. The range of the Burn-In time is between 30 mins to 30 days.
- Hashing: Built-in CRC64 verification that the user can perform once a copy is completed to verify the master is 100% the same as targets/copies.
- Write once read many (WORM) Function: The Write Protection or WORM function gives you the ability to make your USB Thumb Drive permanently read-only once they have been duplicated. This write-protection affords the assurance that the data cannot be tampered with once it is written to the USB Thumb Drive.
- Dual Source Compare Mode (DSCM): Dual source comparison mode can eliminate the chance of a duplication error caused by a worn or a source that is not 100% accurate. Use the first port as a copying source and use the second port as a backup/compare source. It will guarantee the highest reliability and 100% accuracy of the duplication process if your application demands it.
- Get ID (MID/OID/SN) Function: This function enables the duplicator to output the ID of the USB flash memory stick. This function is perfect for some software applications (i.e encryption applications) that require a unique ID.
- 24 Months Warranty: Have peace of mind knowing that your PRO gear is fully covered for two years.
Highlights
- Operation Type - Standalone, FPGA based operation, not a computer based design
- Controller Design - Embedded controller is designed to support capacities over 18TB+. Constant improvement supports latest available devices on the market
- Bandwidth Performance - DupliUSB transfers of up to 33.33MB/sec.
- All systems have dedicated bandwidth enabling high volume replications without speed degradation to all ports simultaneously.
- Systems & files copy mode supports Windows (FAT16/32, NTFS), Linux(Ext2/Ext3/Ext4) and Mac (HFS, HFS+, HFSX.)
- Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase + Compare.
Key Features and Benefits
Multi-Core Processor Provides High-Speed Mass Duplication
Each slot has an independent and dedicated channel processor and therefore can support up to 2GB per minute bandwidth per port. Whether your target is one piece or 119 pieces; the copy speed (bandwidth) remains the same.
Quick Data Copy
Quick data copy function will analyze the data and copy only the data portion, thereby enhancing the copying efficiency.
Copy + Compare Function
After making a copy, the bit-by-bit compare function guarantees the data copy integrity. It's a fast, reliable and convenient hardware-based solution.
Features
- High-speed copy supports up to 2GB per minute.
- Apply new advanced Multi-Core processor
- Completely standalone system, no computer required.
- Design to copy USB flash memory thumb drives
- Supports format and size
- Comply with the United States Department of Defence (DoD) data security standard provides DoD Erase function.
- Quick data copy, copies only data contained areas. (Support FAT16/32, Linux ext2/ext3, NTFS)
- Quick 5 seconds format, 3 models available for selection.
- Supports Synchronous modes for Copy/Compare/ Erase/ Format function.
- Strict bit-by-bit hardware comparison further increases the reliability of duplication.
- User-friendly interface with real time information LCD display.
- Firmware upgrade and product support from experienced engineers.
Smart Duplication Modes: DupliUSB Series USB 2.0/3.0/3.1 drive duplicators offer a diverse set of duplication modes. The user may select the appropriate mode based on application requirement.
Graphical illustration of Copy Modes: The areas containing data are marked “Data”. The areas being copied are marked in Black. Duplication time depends on the speed supported by the hard drive's controller chip.
Sustained High Speed: DupliUSB duplicators copy up to 2GB/min to all hard drives simultaneously, without any speed degradation on any port.
High Compatibility
- Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
- Whole media (bit-for-bit) copy mode supports all system and proprietary formats.
- Supports all brands of standard drives.
- Designed to support USB flash drives larger than 18TB.
- Supports MBR and GPT partitioning.
Sanitization methods
- Quick Erase: Erases flash media content in seconds. It will keep the FAT format.
- Full Erase: Erases the entire device
- DoD Erase: Complies with U.S. Department of Defense erasure standards
- Secure erase: A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern drives.
DupliUSB Duplicator Specifications: | |
---|---|
Source Targets: | 1:2, 1:4, 1:9, 1:19, 1:29, 1:39, 1:59, 1:119 |
Operation Type: | Stand-alone, FPGA - based operation (Non-PC based System design.) |
Controller Design: |
|
Bandwith Performance: |
|
Read - Only Source Port: | There is no option to disable this built-in feature |
Modular Socket Design: | Yes, the operator can change sockets in the field themselves (1:4 Model and higher) |
Real - Time PC Monitoring: | Yes, via USB link to Windows PC (1:9 Model and higher) |
2 Copy Modes: |
|
Compare (Verification): | Bit-by-bit data comparison from the source device to target devices |
3 Sanitization Modes: |
|
Format: | Automatically detects and formats devices to either FAT16 or FAT32. |
Measure Speed: | Performs speed check by overwriting and reading the connected device(s) |
Capacity Check: | Verifies the maximum capacity available. |
Calc. CRC64: | Calculates the CRC64 value from the source device. |
A2 Fake Picker: | Checks device(s) that contain fake capacities |
Compatible Devices: | USB1.1 / 2.0 / 3.0 flash memory devices |
Supported Formats: |
|
Supported O/S: | All (Windows, Mac, Linux, and other proprietary systems). |
LCD Display: | Backlit Monochrome LCD Display |
LEDs: |
|
Control Panel: | 4 Push Buttons (Up, Down, OK, ESC) |
Power Requirements: |
|
Operational Temperature: | 5°C ~ 45°C (41°F ~ 113°F) |
Non-Operational Temperature: | -20°C ~ 85°C (-4°F ~ 185°F) |
Humidity |
|
Certifications: | FCC, CE, RoHS Compliant |